TMV 0512EN

DC/DC Converter TMV-EN Series, 1 Watt • • • Single-in-line package (SIP) • • I/O isolation voltage 3000 VACrms • • Unregulated device Industrial safety to IEC/EN/UL 62368-1 Reinforced insulation rated for 300 VAC working voltage Operating temperature range –25 °C to +85 °C UL 62368-1 IEC 62368-1 The TMV-EN series is a range of 1 Watt non-regulated DC/DC converters with high I/O isolation. This product features an isolation barrier which is approved for supplementary an reinforced insulation. SMD construction and a special designed toroidal transformer made it possible to built these converters in a standard SIP package with a very small footprint. These features making the TMV-EN series an economical solution in many DC/DC converter applications requiring safety agency approval. 3-year product warranty Models Order Code Input Voltage Range TMV 0505EN TMV 0512EN TMV 0515EN TMV 0505DEN TMV 0512DEN TMV 0515DEN TMV 1205EN TMV 1212EN TMV 1215EN TMV 1205DEN TMV 1212DEN TMV 1215DEN www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 200 mA 80 mA 65 mA 100 mA 40 mA 35 mA 200 mA 80 mA 65 mA 100 mA 40 mA 35 mA November 2, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 100 mA 40 mA 35 mA –5 VDC –12 VDC –15 VDC 100 mA 40 mA 35 mA typ. 66 % 66 % 66 % 66 % 72 % 73 % 66 % 66 % 66 % 66 % 74 % 75 % Page 1 / 4 TMV-EN Series, 1 Watt Input Specifications Input Current 5 Vin models: 55 mA typ. 12 Vin models: 30 mA typ. 5 Vin models: 303 mA typ. (5 Vout model) 291 mA typ. (12 Vout model) 295 mA typ. (15 Vout model) 303 mA typ. (5 / -5 Vout model) 267 mA typ. (12 / -12 Vout model) 287 mA typ. (15 / -15 Vout model) 12 Vin models: 126 mA typ. (5 Vout model) 121 mA typ. (12 Vout model) 123 mA typ. (15 Vout model) 126 mA typ. (5 / -5 Vout model) 108 mA typ. (12 / -12 Vout model) 117 mA typ. (15 / -15 Vout model) 5 Vin models: 9 VDC max. (1 s max.) 12 Vin models: 29 VDC max. (1 s max.) 5 Vin models: 500 mA (slow blow) 12 Vin models: 200 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal LC-Type - At no load - At full load Surge Voltage Recommended Input Fuse Input Filter Output Specifications Voltage Set Accuracy Regulation - Input Variation (1% Vin step) Ripple and Noise - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth Capacitive Load - single output - dual output single output models: dual output models: See application note: dual output models: 5 Vout models: 12 Vout models: 15 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection ±3% max. 1.5% max. 1.5% max. www.tracopower.com/overview/tmv-en 1% max. 150 mVp-p max. (To further reduce Ripple and Noise, a capacitor with 1.5 μF X7R is recommended.) 680 µF max. 680 µF max. 680 µF max. 220 / 220 µF max. 220 / 220 µF max. 220 / 220 µF max. 3 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 270 ms max. Limited 0.5 s max., Automatic recovery Safety Specifications Standards EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/tmv-en PD 2 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 2, 2023 Page 2 / 4 TMV-EN Series, 1 Watt EMC Specifications EMI Emissions EN 55032 class A (with external filter) EN 55032 class A (internal filter) External filter proposal: www.tracopower.com/overview/tmv-en - Conducted Emissions - Radiated Emissions General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Regulator Topology Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Isolation Capacitance - Input to Output, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V Distance Through Isolation Reliability - Calculated MTBF Washing Process Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight 95% max. (non condensing) –25°C to +85°C +105°C max. –50°C to +125°C 2.85 %/K above 70°C See application note: www.tracopower.com/overview/tmv-en Natural convection (20 LFM) 5'000 m max. Push-Pull Converter 50 - 100 kHz (PFM) 80 kHz typ. (PFM) Reinforced Insulation 300 VAC 3'000 VAC 10'000 MΩ min. 15 pF typ. 20 pF max. 2 mm 2'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Nickel-Iron (Alloy 42) Nickel (1 µm min.) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) SIP7 Lead-Free Wave Soldering 260°C / 10 s max. 3.9 g Thermal Impedance - Case to Ambient Environmental Compliance - REACH Declaration 65 K/W typ. www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 8abcc5bc-907a-45fc-8026-2239f71e59cc - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmv-en All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 2, 2023 Page 3 / 4 TMV-EN Series, 1 Watt Outline Dimensions 22.0 (0.87) Pinout 12.5 (0.49) Dual +Vin (Vcc) 2 –Vin (GND) 5 –Vout 6 7 3.2 0.5 (0.02) Single 1 No pin Common +Vout (0.13) 0.5 (0.02) Pin 3.50 (0.138) 2.54 7.62 2x 2.54 (0.100) (0.300) (2x 0.100) 5 6 7 7.5 (0.30) 2 2.0 (0.08) Bottom view 1 0.25 (0.010) 21.0 (0.83) 0.50 (0.020) Dimensions in mm (inch) Tolerance: x.x ±0.5 (x.xx ±0.02) x.xx ±0.13 (x.xxx ±0.005) Pin tolerance: ±0.05 (±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 2, 2023 Page 4 / 4